wrreisen

Hi, Does the IPR use the Distributed render DR servers like I think Corona's does, please? Thanks for any advice.

Hi I have a farm of about 10 machines. Only one of them when it tries to connect to the Manager gives these errors on the Manager (Backburner 2016, Windows 10, problem server is on IP 192.168.1.89): 2016/02/04 16:46:06 WRN Attempt to register busy server td89x4 2016/02/04 16:46:06 INF Cannot handle registration from td89x4. Will try later. 2016/02/04 16:46:16 WRN Attempt to register busy server td89x4 2016/02/04 16:46:16 INF Cannot handle registration from td89x4. Will try later. 2016/02/04 16:46:26 WRN Attempt to register busy server td89x4 2016/02/04 16:46:26 INF Cannot handle registration from td89x4. Will try later. 2016/02/04 16:46:26 ERR Timeout reading data from socket 2016/02/04 16:46:26 ERR Error 0xFFAA0000 Communicating with 192.168.1.89 2016/02/04 16:46:26 INF td22x8 completed 1 task(s) 2016/02/04 16:46:46 WRN Attempt to register busy server td89x4 2016/02/04 16:46:46 INF Cannot handle registration from td89x4. Will try later. 2016/02/04 16:46:56 WRN Attempt to register busy server td89x4 2016/02/04 16:46:56 INF Cannot handle registration from td89x4. Will try later. 2016/02/04 16:47:06 INF Cannot handle registration from td89x4. Will try later. 2016/02/04 16:47:06 ERR Timeout reading data from socket 2016/02/04 16:47:06 ERR Error 0xFFAA0000 Communicating with 192.168.1.89 016/02/04 16:48:56 ERR Timeout reading data from socket 2016/02/04 16:48:56 ERR Error 0xFFAA0000 Communicating with 192.168.1.89 2016/02/04 16:49:36 ERR Timeout reading data from socket 2016/02/04 16:49:36 ERR Error 0xFFAA0000 Communicating with 192.168.1.89 2016/02/04 16:50:16 ERR Timeout reading data from socket 2016/02/04 16:50:16 ERR Error 0xFFAA0000 Communicating with 192.168.1.89 2016/02/04 16:50:56 ERR Timeout reading data from socket 2016/02/04 16:50:56 ERR Error 0xFFAA0000 Communicating with 192.168.1.89 2016/02/04 16:51:36 ERR Timeout reading data from socket 2016/02/04 16:51:36 ERR Error 0xFFAA0000 Communicating with 192.168.1.89 2016/02/04 16:52:16 ERR Timeout reading data from socket 2016/02/04 16:52:16 ERR Error 0xFFAA0000 Communicating with 192.168.1.89

Hi, For estate agents graphics do you need to render at A4 300 dpi (about 3600 pixels across) With Vray this would take a long time. Up until now I have been using 3dsmax Scanline renderer for exteriors. It is so much quicker than Vray even though I have 8 cores on my main workstation. Can you get away with less pixels as websites such as rightmove dot co dot uk have smaller images required than the traditional estate agents printed material. Thanks for any advice.