Photmontage Problem

[Sketchrender]

I am posting here also because i have no luck with the vray forum on here.

 

 

I have placed a number of cameras as per the drawings I have received.

Eg. Cam 11.2m and the image i have to montage into is says it is...

 

"an angle of 60 deg on the horizontal"

 

I have also placed the camera Target at 11.2m , as i am presuming this is what your suposed to do, to make the horizontal correct.

 

The buildings i am montaging are 1.5km away in a city.

 

I am using the a vray 1.5 ( the upgrade also for max 10) camera, and Max 2010.

 

The horizontal line is in the centre of my view port as it is suposed to be, I think.

But the Horizontal in the image I am montaging is way below it.

I am montaging over a montage to show a difference.

 

I know the montages are correct that i using as they have been done by a very good source, and confirmed by another company also.

 

So were am I going wrong.

 

I can not post the images as they are sensitive, sorry.

 

PS. 60mm camera lens, when I fiddled with it came out about 38 in the vray cam FOV

 

Help would be great.

 

Phil

 

The new camera selection tool in max 10 is very delicate, and very close together.

 

 

 

help would be appreciated.