Splotces

[WeazzeL]

Hi all,

 

I'm having a lot of problems with splotches. I attached 2 renderings of different render quality, but the result is not good. I usually use Solidrock, but even if i manually increase the settings, splotches are still there. Lighting is done by a dome with hdri in it. It is work in progress, but any critics are welcome.

 

Thank you

[alejandroserranomonforte]

Can you post your indirect illumination settings? I dont like the camera, dont know if its what you want if not try camara correction modifier.

[WeazzeL]

These are the settings for the first one

[ATTACH=CONFIG]43366[/ATTACH]

 

These are for the second one

[ATTACH=CONFIG]43367[/ATTACH]

[mariojbg]

use some built-in irradiance map preset.. like medium or high..

and use higher numbers in Hsph.subdivs and Interp.samples.. i usually use something like 60 60

[sanmb]

Increase subdivisions of light and increase noise threshold to .005 or .001

[WeazzeL]

it seems that there were multiple problems. dome multiplyer was 60, i changed to 1. adjusted exposure as needed, used another profile (dark_interior) from SR. It is new so i had no ideea there was something like this. So this is what resulted on medium IM/LC + AO:

[ATTACH=CONFIG]43375[/ATTACH]

 

Render time was like .. 3-4 minutes at 1280/720... so it was great.

If i mannualy increased hsph and interp to ... 40.. maybe 50 ... my render times went to at least 30 minutes on "good" preset.