PC configuration

[nithinr]

HI,everyone i have a pc configuration i need to cut price so can anyone give me suggestion....

1.Intel Xeon Processor E5-2650 v4 x 2

OR

2.Intel Xeon Processor E5-2660 v4 x 2

3.Asus Workstation Board Z10PE-D8 WS C612 CS Socket 2011 v3

4.WD SATA 1Tb Black Caviar WD1003FZEX

5.Solid State Drive Samsung 850 Pro 256gb SSD

6.Cabinet Cooler Master Cosmos II Ultra Tower RC1200-KKN1

7.Graphics Card Asus Nvidia Strix Geforce GTX 1080 8GB DDR5X

8.Liquid CPU Cooler Corsair Hydro H80i v2 x 2

9.SMPS Modular Seasonic 1050W SS-1050XP3 Full Modular Platinum Certified

10.Crucial 32GB (2 x 16GB) ECC Registered DDR4-2400 Memory

[Dimitris Tolios]

How much cheaper?

Which compromise are you willing to make?

Slightly slower Multi-threaded but same single threaded?

Slower multithreaded but better single-threaded?

Slower GPU? A 1070 perhaps?

 

Also, do realize that in 2P systems, each CPU has its own banks of RAM. These are dual / quad channel chips. For maximum bandwidth you should go for quad channel on each CPU...that is 8x dimms total. As a minimum I would suggest 2x dimms on each, for at leats dual-channel performance, again, that would be 4x dimms total.

[Nikolaos M]

He could also just change this gigantic chassis with something more normal in size, and also the 1050W Platinum psu. And he doesn't need 2xh80i for cooling. Two mid-end air coolers would be just fine, as long as the motherboard can hold them side by side.

 

But I think that our friend is just seaking for specific answers. I saw some older posts and I think he's a bit confused about what he wants and what he really needs.

[ramon acha]

I'd cut a bit in the CPU, If you go for the E5-2630 v4 x 2 instead of 2650, you'd save 1K and won't lose too much render power:

https://www.cpubenchmark.net/high_end_cpus.html

 

I agree with Dimitry and would go for a 8x8GB RAM